Cleaning and maintenance of the machine
Release time:
2023-09-22
1. Check the fasteners of each part frequently during use, and tighten them in time if they are loose;
1. Check the fasteners of each part frequently during use, and tighten them in time if they are loose;
2. The gear meshing area of the machine is lubricated with grease and oil is added every half month. There is a powder metallurgy bearing shell in the bearing housing. Each shift should fill the oil cup on the bearing seat twice, otherwise, the consequences of the shaft and bearing bush should be borne by themselves;
3. The amount of flour added when mixing flour shall not exceed the capacity of the flour barrel to avoid burning the motor;
4. If you find oil stains on the dough, you should repair it in time and replace the oil seal.
5. After the machine is used, it should be cleaned in time to avoid affecting reuse;
6. When cleaning, the height of the water in the barrel shall not exceed the low point of the shaft to prevent water from overflowing from the shaft hole of the side plate of the barrel or flowing into the interlayer of the side plate, which will affect the service life;
7. This machine is anti-drip equipment, it is forbidden to use water spray pipe for cleaning.
Key words:
machine
bearing
shaft
Related News
Junyu is committed to producing various food machinery brand enterprises!
Contact Information
Add: 6099 Puwei Highway, Fengxian District, Shanghai
Working hours: 9:00 - 18:00
Copyright©2023 Shanghai Junyu Food Machinery Co., Ltd.All Rights Reserved Power by:www.300.cn Business License SEO Tags